I-Wall-based based Odorless 3 kwi-1 yangaphakathi yodonga lwePaint
IParameter yeMveliso
| Izithako | Amanzi, i-emulsion esusa ivumba lamanzi, ibala lokusingqongileyo, isongezo sokusingqongileyo |
| Viscosity | 117Pa.s |
| ixabiso pH | 7.5 |
| Ukumelana namanzi | 5000 amaxesha |
| Inkcazo yethiyori | 0.95 |
| Ixesha lokumisa | Umphezulu womile kwiiyure ze-2, wome nzima malunga neeyure ezingama-24. |
| Ixesha lokupeyinta | Iiyure ezi-2 (ngokusekwe kwifilimu eyomileyo i-30 microns, 25-30 ℃) |
| Umxholo oqinileyo | 58% |
| Umlinganiselo | 1.3 |
| Ilizwe lemveli | Yenziwe etshayina |
| Umzekelo NO. | I-BPR-1303 |
| Isimo somzimba | ulwelo olumhlophe lwe-viscous |
Iimpawu zeMveliso
• I-Bacteriostatic
• I-Anti-mildew
• Ukucoca kulula
Isicelo seMveliso
Kufanelekile ukugquma ii-substrates ezahlukeneyo, ezifana neendonga zangaphakathi kunye neesilingi.
Ukwakhiwa kweMveliso
Ukucoca isixhobo
Nceda usebenzise amanzi acocekileyo ukuhlamba zonke izitya ngexesha emva kokumisa embindini wokupeyinta nasemva kokupeyinta.
Ukusetyenziswa kwepeyinti yethiyori
I-9.0-10 square metres / kg / pass single (ifilimu eyomileyo i-30 microns), ngenxa yobunzima beyona ndawo yokwakha kunye ne-dilution ratio, inani lokusetyenziswa kwepeyinti likwahluke.
Ukupakishwa kokucaciswa
20KG
Indlela yokugcina
Gcina kwindawo epholileyo neyomileyo kwi-0°C-35°C, kunqande imvula nokuba sesichengeni selanga, kwaye uthintele ngokungqongqo iqabaka.Kuphephe ukupakisha phezulu kakhulu.
Unyango lwe-substrate
Xa usakha udonga olutsha, susa uthuli olungaphezulu, i-greasy kunye ne-plaster ekhululekile, kwaye ukuba kukho iipores, zilungise kwangethuba ukuze uqinisekise ukuba udonga lucocekile, lomile kwaye lugudile.
Okokuqala ukubuyisela umphezulu wodonga: phelisa ifilimu yepeyinti ebuthathaka kwindawo endala yodonga, susa umgubo wothuli kunye nokungcola phezu komhlaba, uyifake kwaye uyipholise, ucoce kwaye uyomise kakuhle.
Ixesha lokulondoloza
Iintsuku ezisi-7/25°C, iqondo lobushushu eliphantsi (elingekho ngaphantsi kwe-5°C) kufuneka landiswe ngokufanelekileyo ukuze kufumaneke impembelelo yefilimu yepeyinti efanelekileyo.
Imeko yomphezulu
Umphezulu we-substrate efakwe ngaphambili kufuneka uqine, wome, ucoceke, ugudiswe kwaye ungabi nanto ekhululekile.
Qinisekisa ukuba ukufuma komphezulu we-substrate eqatyiweyo kungaphantsi kwe-10% kwaye i-pH ingaphantsi kwe-10.
Umphezulu womgubo
1. Susa i-coating yomgubo ukusuka phezulu kangangoko kunokwenzeka, kwaye ulinganise kwakhona nge-putty.
2. Emva kokuba i-putty yomile, ilula nge-sandpaper ecocekileyo kwaye ususe i powder.
Umphezulu ongundayo
1. Ifosholo nge-spatula kunye nesanti kunye ne-sandpaper ukususa i-mildew.
2. Gcoba ixesha eli-1 ngamanzi afanelekileyo okuhlamba ngundo, kwaye uhlambe ngamanzi acocekileyo ngexesha, kwaye uyomise ngokupheleleyo.
Iingongoma Kwingqalelo
Iingcebiso zokwakha kunye nokusetyenziswa
1. Funda ngokucophelela imiyalelo yokusebenzisa le mveliso ngaphambi kokwakhiwa.
2. Kucetyiswa ukuba uzame kwindawo encinci kuqala, kwaye ukuba unemibuzo, nceda uqhagamshelane ngexesha ngaphambi kokuba uyisebenzise.
3. Kulumkele ukugcina amaqondo obushushu aphantsi okanye ube sesichengeni selanga.
4. Sebenzisa ngokwemiyalelo yobugcisa bemveliso.
Umgangatho olawulayo
Le mveliso ihambelana ngokupheleleyo neMigangatho yeSizwe/yeShishini:
I-GB18582-2008 "Imida yezinto ezinobungozi kwi-Adhesives kwi-Internal Decoration Materials"
I-GB/T 9756-2018 "I-Synthetic Resin Emulsion yangaphakathi yeeCoatings Wall"
Amanyathelo okwakhiwa kwemveliso
Umboniso weMveliso
