Ipeyinti yoDonga yaNgaphandle eSekelwe kwiAntifouling

Inkcazelo emfutshane:

Le mveliso yepeyinti yepeyinti eludongeni yodidi lwelotus yelotus isebenzisa itekhnoloji ekhethekileyo ye-nano-helijing ye-Liside, ephindaphinda ubume be-microstructure yegqabi lelotus, ukuze umphezulu wefilim yepeyinti ube ne-hydrophobicity ephezulu kunye nokukwazi ukuzicoca kwegqabi lelotus.Ukwandisa i-hydrophobicity yobuso befilimu yepeyinti kwaye wenze ifilimu yepeyinti ibe denser, ngaloo ndlela ikhulise kakhulu ukuchasana kwebala lodonga lwasekhaya kumanzi asekelwe emanzini;ngelixa usombulula ingxaki yodonga lwasekhaya, awusayi kuphinda ukhathazeke ngamavumba acaphukisayo, ukuze ungene kwikhaya lakho elitsha ngokukhawuleza.

Iimpawu zeMveliso:• Ukumelana nemozulu ephezulu • Ukugcinwa kakuhle kombala • Ulwakhiwo oluhle

Usetyenziso:Ifanelekile ubunjineli obuqhelekileyo bokwaleka eludongeni lwangaphandle.

Isampulu yesitokhwe siMahala kwaye siyafumaneka

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

IParameter yeMveliso

Izithako	Amanzi;I-emulsion yokukhusela indalo esekelwe emanzini;Ibala lokukhuselwa kokusingqongileyo;Isongezo sokusingqongileyo
Viscosity	113Pa.s
ixabiso pH	8
Ukumelana nemozulu	iminyaka emihlanu
Inkcazo yethiyori	0.9
Ixesha lokumisa	Umphezulu womile kwiyure ye-1, yome nzima malunga neeyure ze-2.
Ixesha lokupeyinta	Iiyure ezi-2 (kwimozulu emanzi okanye ubushushu buphantsi kakhulu, ixesha kufuneka landiswe ngokufanelekileyo)
Umxholo oqinileyo	52%
Umlinganiselo	1.3
Ilizwe lemveli	Yenziwe etshayina
Umzekelo NO.	I-BPR-920
Isimo somzimba	Ulwelo olumhlophe lwe-viscous

Isicelo seMveliso

Imiyalelo

Ukusetyenziswa kwepeyinti ngokwethiyori (30μm ifilimu eyomileyo):14-16 square metres / ilitha / ipasi enye (okanye 12-14 square metres / kg / pass single) .Indawo yokwaleka yangempela iyahluka ngokoburhabaxa kunye nokoma komphezulu we-substrate, indlela yokwakha kunye ne-dilution ratio, kunye nesantya sokugquma sikwahluke.

Ukunciphisa:Ukuze ufezekise umphumo ongcono wokuxubha, unokuhlanjululwa ngokungekho ngaphezu kwe-20% (umlinganiselo womthamo) wamanzi ngokwemeko yangoku.
Kufuneka ixutywe ngokulinganayo phambi kokusetyenziswa, kwaye kungcono ukuyihluza.

Unyango lwesubstrate:Xa usakha udonga olutsha, susa uthuli olungaphezulu, i-greasy kunye ne-plaster ekhululekile, kwaye ukuba kukho iipores, zilungise kwangethuba ukuze uqinisekise ukuba udonga lucocekile, lomile kwaye lugudile.
Okokuqala ukubuyisela umphezulu wodonga: phelisa ifilimu yepeyinti ebuthathaka kwindawo endala yodonga, susa umgubo wothuli kunye nokungcola phezu komhlaba, uyifake kwaye uyipholise, ucoce kwaye uyomise kakuhle.

Imeko yomphezulu:Umphezulu we-substrate efakwe ngaphambili kufuneka uqine, wome, ucoceke, ugudiswe kwaye ungabi nanto ekhululekile.
Qinisekisa ukuba ukufuma komphezulu we-substrate eqatyiweyo kungaphantsi kwe-10% kwaye i-pH ingaphantsi kwe-10.

Imiqathango yesicelo:Nceda ungafaki kwimozulu emanzi okanye ebandayo (iqondo lobushushu lingaphantsi kwe-5 ° C kwaye iqondo elihambelanayo lingaphezulu kwe-85%) okanye umphumo olindelekileyo wokugquma awuyi kufezekiswa.
Nceda uyisebenzise kwindawo engenamoya.Ukuba ufuna ngokwenene ukusebenza kwindawo evaliweyo, kufuneka ufake i-ventilation kwaye usebenzise izixhobo ezifanelekileyo zokukhusela.

Ixesha lokulungisa:Iintsuku ezisi-7/25°C, iqondo lobushushu eliphantsi (elingekho ngaphantsi kwe-5°C) kufuneka landiswe ngokufanelekileyo ukuze kufumaneke impembelelo yefilimu yepeyinti efanelekileyo.

Umphezulu womgubo:
1. Susa i-coating yomgubo ukusuka phezulu kangangoko kunokwenzeka, kwaye ulinganise kwakhona nge-putty.
2. Emva kokuba i-putty yomile, ilula nge-sandpaper ecocekileyo kwaye ususe i powder.

Umphezulu onomngundo:
1. Ifosholo nge-spatula kunye nesanti kunye ne-sandpaper ukususa i-mildew.
2. Gcoba ixesha eli-1 ngamanzi afanelekileyo okuhlamba ngundo, kwaye uhlambe ngamanzi acocekileyo ngexesha, kwaye uyomise ngokupheleleyo.

Ukucoca izixhobo:Nceda usebenzise amanzi acocekileyo ukuhlamba zonke izitya ngexesha emva kokumisa embindini wokupeyinta nasemva kokupeyinta.

Ukupakishwa kokucaciswa:20KG

Indlela yokugcina:Gcina kwindawo epholileyo neyomileyo kwi-0°C-35°C, kunqande imvula nokuba sesichengeni selanga, kwaye uthintele ngokungqongqo iqabaka.Kuphephe ukupakisha phezulu kakhulu.

Iingongoma Kwingqalelo

Iingcebiso zokwakha kunye nokusetyenziswa:
1. Funda ngokucophelela imiyalelo yokusebenzisa le mveliso ngaphambi kokwakhiwa.
2. Kucetyiswa ukuba uzame kwindawo encinci kuqala, kwaye ukuba unemibuzo, nceda uqhagamshelane ngexesha ngaphambi kokuba uyisebenzise.
3. Kulumkele ukugcina amaqondo obushushu aphantsi okanye ube sesichengeni selanga.
4. Sebenzisa ngokwemiyalelo yobugcisa bemveliso.

Umgangatho wesiGqeba:
Imveliso ihambelana ne-GB/T9755-2014 "I-Synthetic Resin Emulsion yangaphandle yeeCoatings